Select Hardware

Find your board, then choose its display. Selecting a display applies your choice.

Raspberry Pi Pico W USB + Wi-Fi
Raspberry Pi Pico USB only
Waveshare RP2040-Matrix USB only
GlowGrid WorkspaceLAN IP Display
Program 03 · Network utility

Show this board’s LAN IP.

The board discovers its own Wi-Fi address when it starts and scrolls it across the selected display. If the board is offline, it shows “NO IP”.

Board simulation

Example · 192.168.1.222

LED colorRGB palette
+

How it works

Find your board at a glance.

The board reads its network address and keeps it moving across the LED display.

01 / CONNECT

Join your Wi-Fi

Pico W and Pico 2 W use the saved Wi-Fi network. Pico, Pico 2, and Waveshare RP2040-Matrix have no Wi-Fi and display NO IP; use USB to upload.

02 / READ

See the address

Your current LAN IP scrolls across the display in the color and speed you choose.

03 / REUSE

Upload your next program

Use the displayed address for Wi-Fi uploads on W boards, or connect any supported board over USB.

Prepare LAN IP Display

Hardware — Current setup Loading selected hardware…
Change the hardware?
Your board uses 2.4 GHz Wi-FiKeep this device and the board on the same network.

See the program you are sending to the board

Let’s talk

Need a hand with GlowGrid? Drop us a line — we’d love to hear from you.

info@nodes.ro